|
Speed Gems Transmission Adapters
|
|
|
|
337 Lincoln engine that I originally built for my Model'A' has some very innovative and creative work done to it. We made the intake manifold and everything else attached to it from scratch. The lines are actually vaccum lines so we could utilize a PCV, a MAP sensor and an IAC motor. The PCM for the sequential port fuel injection is from a GM Ramjet motor. I found some old Edmunds heads for it and custom made the exhaust system, which actually has mufflers built into both sides.
Bendtsen’s Transmission Center Inc. 763 767 4480 13603 Johnson St NE, Ham Lake, MN. 55304
|
|
We accept the following credit cards:
Copyright © 2002 Bendtsen's Transmission Center Inc. All rights reserved. |
