|
Home
About Us
Gallery
Kit Pricing
Transmissions
Parts for Sale
Installation Instructions
Machining Services
Links
|
Street Rod 700R4
Transmissions
A $1295.00 Street Rod 700R4 transmission from Bendtsen's
Transmission will have the following components installed if you have 350 HP or
less.
- 8 Friction 3-4 clutch assembly (Z-pak)
- High Energy band
- 10 vane pump w/.471 boost valve (13 vane pumps have lower
volume)
- New tall low roller clutch assembly
- 6 low-reverse frictions
- Improved sun shell
- New 29 element sprag
- New Torrington bearings
- New bushings
- Corvette servo and superior 4th piston
- Transgo shift kit & new accumulator pistons
- 2000 stall converter with furnace brazed turbine and
impellor, all Torrington bearings, hardened turbine splines, H/D lockup
clutch
Our $1695.00 Street Rod 700R4 transmissions that are meant for
400 HP or more will have the following components.
- 8 Friction 3-4 clutch assembly w/Kolene steel plates (Z-pak)
- High Energy band
- 10 vane pump w/.500 boost valve (13 vane pumps have lower
volume)
- New tall low roller clutch
- 6 low reverse frictions w/Kolene steels
- 'The Beast' sun shell
- New 29 element sprag
- New Torrington bearings
- New bushings
- Super Servo w/superior 4th piston
- Transgo shift kit & new accumulator pistons
- New 5 pinion low planetary gearset / and 5 pinion
intermediate planetary gearset
- Up to 2500 stall speed converter with furnace brazed
turbine and impellor, all Torrington bearings, hardened turbine splines, H/D
lockup clutch, flanged hub, billet front cover. Other stall speeds
available for extra cost.
- Dyno-tested
We carefully check band pin length, unit end play, and clutch
clearances.
We can set the speedo drive gears to match your car's tire
size and gear ratio.
Both transmissions have transmission mount, dipstick and tube,
inspection cover, detent cable, and the worlds best Lockup Controller included.
Also available -
High performance Ford AOD, 2004R, 4L80E, 4L60E, E40D
transmissions are custom built and we also sell TCI and Bauman stand alone
controllers for these units. All electronic transmissions are Dyno tested
on our Axi-line transmission Dyno.
Bendtsen’s Transmission Center Inc. 763 767 4480
13603 Johnson St NE, Ham Lake, MN.
55304
bob@transmissionadapters.com
|